Super Mario Icons Megapack
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Modify the PLATE STLs with the COLOR STLs to make a multicolor print.
- Ocena
- 5 / 5
- Polubienia
- 111
- Pobrania
- 265
- Wydruki
- 1
- Wyświetlenia
- 1714
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
STLs will line up automatically in Bambu Studio and Orca Slicer!
You only need about 2 layers of the artwork so scale the STLs to 0.4mm in height. The 3mf is for Bambu Studio or Orca Slicer and includes a manual filament change code. It has 12x3 (12.25x2.8) negative cylinders and pause gcodes to insert magnets. The powerups have a 6x2 (6.25x2) negative space for a magnet.
To slice the file yourself, use Bambu Studio or Orca Slicer, add the PLATE.STL, then right click it, add modifier, then select all the COLOR.STLs. add your filament colors and select the appropriate color for the files, then slice.
I'm not sure how to do this with Prusa Slicer, I tried but failed.
I didn't optimize the files (almost 2.2GB total) so if you have trouble slicing it, try deleting the black and make the plate black and just swap the filament at a pause with layer height at layer 3 or at Z 0.6mm.
The Captain Toad with the words “Hang in there” can be found here