1 / 3
Snub Nose Ice Scoop for Countertop Ice Makers — zdjęcie 1
1 / 3

Snub Nose Ice Scoop for Countertop Ice Makers

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Orientacyjna cena wydruku pliku

3,80 € – 4,65 € netto (bez VAT)

Dla pliku: Compact Ice Scoop v3 PROJECT.gcode

To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.

Plik i założenia wyceny

Plik użyty do wyceny

Średnia wycena orientacyjna: 4,22 € netto (środek widełek).

Masa podana przez autora
55 g
Czas druku podany przez autora
4,12 godz.
Materiał u źródła
PLA
Materiał wyceny
PLA
Drukarka wyceny
Bambu Lab P1S - 0.4 nozzle
Proces wyceny
0.20mm Standard

Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.

Zapisane na tym urządzeniu.

A compact design ice scoop that fits in the narrow ice compartments of countertop ice makers with holder

Ocena
5 / 5
Polubienia
13
Pobrania
173
Wydruki
3
Wyświetlenia
917
Oceny
3

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Kitchen
Licencja
Creative Commons — Attribution — Noncommercial

This is a variation of my previous two piece ice scoop with traditional handle. I found that the traditional handle that sticks out the back is a problem in the deep ice compartments of countertop ice makers. This design completely solves the problem by positioning a two finger grip ring above the scoop instead of behind.

Holder with screw holes and without are provide to mount on any vertical surface like the side of the ice maker. I used double-back tape and/or 3M command strips to mount on the side of my ice maker.

Print the handle and holder on the side edge and main scoop it's flat bottom. I used PLA but ASA would allow one to run it through the dishwasher.

The design is parameterized so anyone with a working install of Fusion 360 should be able to customize the model. Also a step file is included to import into other software.

Two M3 screws are need to attach the handle, 5mm or 6mm should work. I used roundhead but any should work.

EDIT: Added larger version my brother requested

Original: 80mm L x 65mm W x 35mm H
Larger: 105mm L x 85mm W x 35mm H

Tagi