1 / 4
Ender 5 Visible Hotend Variant + Hooks
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I liked the original design, but the screw holes for the front bar were 3mm off from the ones in my front bar. The…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 88
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution
I liked the original design, but the screw holes for the front bar were 3mm off from the ones in my front bar. The holes for those screws were so tight it was difficult to drop a screw through them, so I moved the screws and widened the holes slightly. There are two additional variants with small hooks on them where you can hang tools on lanyards or with large enough hanger holes.
Print Settings
Rafts:
No
Supports:
No
Resolution:
200
Infill:
20
Filament: PolyMaker PLA
Category: 3D Printer Parts