Clicky Joystick Fidget
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Easy to print joystick fidget toy that can house a 6x6mm tactile button to make a realistic click.
- Ocena
- 4,25 / 5
- Polubienia
- 46
- Pobrania
- 847
- Wydruki
- 8
- Wyświetlenia
- 2621
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Simple to print fidget toy, print both halves, install the tactile button, and snap the two halves together.
Use a 6x6mm tactile button like this: https://amzn.to/46L9ypf
Snip off the legs or bend them back and forth a bunch of time to break them off close to the body of the switch. It should just press into the square at the bottom.
The two halves are tight to snap together, this is to make them a one time snap part that doesn't need any glue.
This design took inspiration from https://www.printables.com/model/276901-joy-fidget,
It was made from complete scratch with no reference to his design as an attempt at learning a function in fusion that I do not regularly use.