1 / 3
Cyberpunk Edgerunners Lithophane Cylinder Spotlight Remix
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix of https://www.printables.com/model/318740-cyberpunk-edgerunners-lithophane-cylinder to support smaller size light
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 41
- Wydruki
- 0
- Wyświetlenia
- 637
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 0) (Komentarze: 1)Remiksy (0)Kolekcje (21)Powiązane
My first remix, a remix of https://www.printables.com/model/318740-cyberpunk-edgerunners-lithophane-cylinder.
- Added a top cover ( I glued tinfoil to the inside which amplifies the effect)
- Tolerances are very high (it's going to be stationary so it didn't bother me)
- Added a base to house a toggle on off led light, the kind you'd get for under cabinets
- The light I used was 69mm (nice), and is a perfect snug fit
- The model itself from w3rN42 was scaled down to 70%
Print info:
- Ender 3 V2 Neo (4020/5015 cooling)
- 0.4mm nozzle
- 10% zigzag infill
- 60mm/s print speed
- “Make overhang printable” checked in Creality Slicer
