Topsy Turvy inserted plant base
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Stable internal base for plants in a Topsy Turvy planter
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 96
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Silk Silver PLA CC3D (not really what I would recommend, but it's what was in the printer)
Ankermake M5/Ankermake Beta Slicer
0.2mm layer height
250mms print speed
25% infill
220c print temp
230c initial layer
65c build plate
70c build plate initial layer
I was going to be planting a Topsy Turvy tomato the next day, and was worried about keeping the plant stable while filling with soil. The foam core by itself isn't really stable enough to reliably keep the stem from folding.
But, a solid base, there is something that will make a difference. Well, I have a printer, and can do a simple base that will give support, and give lots of room to grow.
Designed in Tinkercad in about 30 minutes, and printed in a couple of hours. Works perfectly!