1 / 2
Waste water hose holder "Bob" the dishwasher — zdjęcie 1
1 / 2

Waste water hose holder "Bob" the dishwasher

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Waste water hose holder for "Bob" the legendary dishwasher by Daan Tech

Ocena
0 / 5
Polubienia
7
Pobrania
27
Wydruki
0
Wyświetlenia
402
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Kitchen
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

The legendary Bob, the mini dishwasher of the company Daan Tech from France is extremely popular, especially among campers.

Included is a waste water hose which is attached with a hose clamp on the back.

If one wants to clear its "Bob" now in the camper or caravan aside or stow away after done work again, the waste water hose always swarm impractically around. Of course, you could unscrew the hose clamp but that would be even more impractical.

Much more practical would be the possibility to safely stow the hose on the back of the "Bob" without having to use the hose clamp.

And this is where this 3D model comes into play: with the original screws of the rear wall of the housing, the holder can be fixed. Now simply clip in the waste hose and "Bob" is ready to be put away.

Thanks to Dreezy (@dreezy_798045) for the design of a vacuum cleaner hose holder, which I have modified to fit this purpose. 
 

Tagi