Sapphire Plus Afterburner Mod
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
!!!!!Please note that this is just a mockup yet. Parts like the fan cover are just a dummy without any function. My…
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 35
- Wydruki
- 0
- Wyświetlenia
- 1063
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
Use the parts from his project for the hotend and fan mounts (except the front bracket). In my design you will find all customized parts to make a fitting extruder based on the Voron design. For remaining parts and assembly instructions check the original documentation.
In case you wonder: the two colors where made by printing the logo face down with a 0.1 resolution and printing the front plate on top afterwards.
If I got some more time I will also come up with an own full assembly but it I probably wont really find the time.
Would be great if you could give me feedback in the comments, a like and post a make if you did this.
Print Settings
Printer:
Sapphire Plus
Rafts:
Doesn't Matter
Supports:
No
Resolution:
200
Infill:
40
Filament:
Category: 3D Printer Extruders