Zynthian Synthesizer V4 Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This design is based on the original Zynthian case designed by @LeifA and you need to use his front, sides and bottom…
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 48
- Wydruki
- 1
- Wyświetlenia
- 774
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution
This design is based on the original Zynthian case designed by @LeifA and you need to use his front, sides and bottom parts. My design contains only the top and back plates. https://www.thingiverse.com/thing:4344990
I've got the original Zynthian Display 1.5 with buttons and the audio card I've used was HifiBerry DAC+ADC
The back wall cut outs are for Raspberry Pi 4 board.
This required me to do the changes in the original design,
I've also added the reinforcements in the top plate due to the buttons.
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
25
Filament: Real Filament NL PETG Black
Notes:
This will also work printed with PLA, but I've decided to use PETG for additional strength due to the buttons on the top panel.
Category: Audio