Wowstick Pen Drill case insert
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wowstick Pen Drill case insert
- Ocena
- 5 / 5
- Polubienia
- 9
- Pobrania
- 30
- Wydruki
- 1
- Wyświetlenia
- 314
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
My scratch made version of an internal case for the nice case that Wowstick shipped my pen drill in. I had some 3mm magnets that I CA glued to the lid edge. Once they were dry, added one more magnet to the bottom and used that to mark a small drill hole. With the hole drilled out, a tiny bit of CA glue, slide the lid with the extra magnet in place and voila, a magnetic lid! I painted over the magnets white to somewhat conceal them.
The miniDrillv1BitLid will fit both and is meant to sit between the drill bits and the pen drill to keep the bits from scratching the drill up.
There is also a version 2 which I did not print but has a slightly different layout should you wish.
Thank you for looking at my print and I hope you can find it useful!