Modular sandpaper holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Modular sandpaper holder I uploaded a while back on Thingiverse https://www.thingiverse.com/thing:3122546 After…
- Ocena
- 0 / 5
- Polubienia
- 23
- Pobrania
- 68
- Wydruki
- 0
- Wyświetlenia
- 665
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
Modular sandpaper holder I uploaded a while back on Thingiverse https://www.thingiverse.com/thing:3122546
After starting printing, I had accumulated a small assortment of sandpaper strips and sheets. I couldn't find an easy way of storing both widths, so designed my own to store them standing upright. Picture shows 75mm pegs with the 2000 grit label.
The base is designed so you print as many as you need and snap them together. I also included some wider bases for other things.
The pegs screw in, and all have top connectors so even on a smaller printer, you can print the 75mm peg and just stack them to the desired height.
Labels are all in common sandpaper grits that are found in assorted bundles on Amazon.
Print instructions
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
20%
Notes:
Pegs - print with brim.
Labels - printed successfully without but your mileage may vary.
Base - no brim.