Stackable Horizontal Spool Holder for 1kg or 3kg Filament [V2]
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Designed to stack vertically and lay the spool horizontally. It should accommodate most 3kg spools.
- Ocena
- 5 / 5
- Polubienia
- 71
- Pobrania
- 376
- Wydruki
- 7
- Wyświetlenia
- 3215
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
This is a stacking horizontal spool holder/roller, originally designed for PolyMaker's 3kg spools (120mm wide, 250mm OD, 55mm ID). The parts are broken up with the largest being the tray at 250mm across. A printer with 250mm print area should be able to print all of the parts.
To print a single “stack” of this model, just print everything in one of the project files. The part names include a designator for how many you need to print for one spool holder.
You'll need
- 8x
FlatBit_x8 - 3x
VerticalSupport_x4 - 1x
VerticalSupportStubby_x1 - 4x
BearingPin_x4 - 1x
SpoolPlate_x1 - 2x - 4x
AlignmentRod_x4 - 1x your choice of
AlignmentGuide##mm_x1
Each spool holder unit also needs 4x 608 bearings (skateboard bearings).