Euthia - Complete Storage Solution (Insert) (Original KS)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Euthia - Complete Storage Solution (Insert) (Original KS)
- Ocena
- 0 / 5
- Polubienia
- 17
- Pobrania
- 225
- Wydruki
- 0
- Wyświetlenia
- 2097
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution — Noncommercial
17.1.2024
Replaced “Cards - Monsters” with version 2.
In v1 was wrong card height in 6 compartments, now it is fixed in V2, sorry for that.
Cards - Monsters V2
----------------------------
5.9.2023
Uploaded missing Player tray + lid (sorry for that)
----------------------------
Hi everyone, i have just created Insert for Euthia (Original KS - no expansion), because i could not find one, that i would like. So i created mine.
It uses the original box for miniatures and fits Elemental standee expansion with Griffin.
I tried to make it functional. The towers are made just to take out and ready to use. Same for the Silver/Gold cards, which are made as 2 layers. The Holder for monster cards has cutout made so, that you can read the reward text. The map tiles are not standing on the sharp edge. etc
With all the rest stuff in the box (player board, rules etc.) there is about 7cm free space to the top.
I am using thin sleeves.
I have used parametric The-Boardgame-Insert-Toolkit
Everything has to be printed 1x except:
Map Tile - II a V.stl - 2x (plus lid)
Map Tile - III a IV.stl - 2x (plus lid)
Players.stl - 6x (plus lid)
My print setup in Prusa Slicer
Nozzle - 6mm
Layers and perimeters:
Solid Layers - Top = 0; Bottom = 0
Perimeters - 3
Seam position - Aligned
Perimeter generator - Arachne
Infill
Fill density - 45%
Fill pattern - Adaptive Cubic