magnetig stirr 50mm V2
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Hey folks , I have the wash & cure v2.0 , the big container is not everytime an good thing .
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 11
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
Hey folks , I have the wash & cure v2.0 , the big container is not everytime an good thing .
this is V2 like an cross , is a bit stronger in cleaning .
small prints and delecate prints had to be carefull handle . so i made an magnetig stirr .
it used 2 magnets round 3mm x8mm . print it the 2 files and glue or hot meld together .
but first put the magnets in the right way in .you have to test on your machine !
in the pic you see the build-up and running.
it is not super fast , what not is wanted,
it is for small and thin pieces , so they do not break. i use an deco-fryer-corp also
An Jar from mayonaise or so works very well.
printed in petg but in resin it will do so too ,
step-file is include ,to change for your needs
give an like if you use it