Honeycomb Storage Wall Steam Deck Killswitch Adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Steam Deck Killswitch case adapter for HSW Wall
- Ocena
- 5 / 5
- Polubienia
- 30
- Pobrania
- 90
- Wydruki
- 2
- Wyświetlenia
- 1755
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution — Noncommercial
Very rough model, just quickly modified in Windows 3D builder, but it works for me
Honeycomb Storage Wall adapter for dbrand Killswitch Steam Deck Case
I printed with small organic supports on the overhanging attachment points
BEFORE MOUNTING: Dry fit the adapter on the back of your Killswitch case, twist to lock/unlock repeatedly, and take unit off and blow out scrap that may have been scraped off. Repeat until motion is smooth.
Layer Height: 0.2mm
Infill: 30%
Supports: Yes (hexagon overhang only)
Material: PLA+ (Normal PLA should work as well)
Be responsible, inspect your print and installation. I am not responsible for your steam deck.