Spool Holder (faster print)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This model uses 18mm (outer diameter) PVC pipe, the STEP file is included, you can adjust according to your needs.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 32
- Wydruki
- 0
- Wyświetlenia
- 234
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Share Alike
The contractor left their leftover electric conduit pipes (PVC pipes) with 18mm outer diameter. I was in need of some spool holder, hence I created this model.
The model supports 18mm PVC pipes, so anything that's around 18mm should work without adjustment. The length to cut the pipes are up to you, in the picture I used 12mm length for up to 10mm spool width. Just cut 3 of whatever length you desire and you are good to go.
Auto orientate parts before printing, any layer height should work. The PVC pipe are designed to be press-fitted, so no glue is needed.