Interchangeable Sign Light Box (Halloween, Party, Poker, etc.)

This is a lamp box that I created with several different signs that can easily be swapped out for different occasions. There is no fancy wiring or soldering required and all parts can be purchased from Amazon (I'll provide links to the parts I purchased below).

The light bulb I used in the photos is a multi-color LED, but any standard C7 light bulb should work fine. I printed this in PLA, so I used LED bulbs to minimize the risk of excessive heat deforming the printed pieces.

I designed this at a fairly large size taking advantage of the large print bed on my Mingda Magician Max. I included a set of the box parts scaled down to 90% of the original which should work better on most standard size printers. The signs will need to be scaled to 90% when slicing if you chose to use the smaller lamp box.

The frame is held on the box using 6mm magnets. These can be added during printing or glued in after.

Here are links to the purchased parts:

• Lamp Cord
• Light Bulbs
• Magnets

I plan to add additional signs in the future, so watch this design (or check back periodically) if you'd like to grab the latest.

If you like this design, please consider clicking the "like" link above to allow others to find this more easily.

Thanks & Enjoy!

Category: Decor