1 / 4
Chamber Fan Duct for P1P/P1S - no supports — zdjęcie 1
1 / 4

Chamber Fan Duct for P1P/P1S - no supports

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Simple remix of the chamber fan duct to print it with no supports

Ocena
4,867 / 5
Polubienia
117
Pobrania
1326
Wydruki
15
Wyświetlenia
6914
Oceny
15

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Just a quick remix (of the 38mm version) to be able to print the duct with no (or pretty much no) supports. 

Print it vertically and the only places where you can add minimal support are insert slots, I printed mine with no supports at all and they worked well, but one of the inserts is not perfectly flush with the duct. It still works perfectly well, but if you want inserts flush, you can add some supports.

You don't have to glue the inserts. when the duct is screwed in, there's no way for it to loosen up because the inserts will hold it in.

Tagi