Iphone14+ MagSafe Handled 09/23 UPDATE
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A MagSafe version of my previous iPhone 14 PLUS case
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 334
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Noncommercial
Update 09/23. the original STL and gcode fit the phone too loosly. the current files are a much better fit
this is a 3 piece assembly. Body, “CameraRim” and “MagInsert”.
The body is TPU, the other parts are PET-G.
The Camera Rim provides a ridge around the camera bumpout for extra protection,
The MagInsert allows the attachment of readily available sick-on magnets (https://www.amazon.com/dp/B09NSM4ZZM?psc=1&ref=ppx_yo2ov_dt_b_product_details) to be used and encased in the body of the case.
TPU settings were “Amazon basics TPU” preset 0.2 mm layer height, 20% infill AND “Avoid Crossing Perimeters" set in the ”Print / Layer and Filament" setting. Build plate support was used as the handle is above the plane of the back.
My gcode files are attached
There will be some stringing, but this is easily removed