Print in place Paper Towel Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Easy to load/unload paper towel holder
- Ocena
- 0 / 5
- Polubienia
- 16
- Pobrania
- 74
- Wydruki
- 0
- Wyświetlenia
- 554
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial
I was in the middle of creating a set of accessories for my peg board and decided to make this for the board too.
https://www.printables.com/model/523513-parksideworkzone-peg-board-accessories
This is a print in place model where the ends of the holder move up and down to make easier loading and unloading of the paper towel rolls.
I will upload printed model photos when the second half has printed.
I have also added a non peg board model with screw holes so it can be attached to wall or cupboard as well.
Printed in PLA at 0.2mm
tree supports touching bed only
see photos for print orientation