Minimalistic laptop stands / feet V2
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is an upgrade for the old design I had done. It has a larger surface so it does not come off, and it is quite thin
- Ocena
- 5 / 5
- Polubienia
- 71
- Pobrania
- 544
- Wydruki
- 5
- Wyświetlenia
- 2038
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial
This is an upgrade for the old design I had done.
https://www.printables.com/model/496358-minimalistic-foldable-laptop-feet-riser-stands/files
It has a larger surface so it does not come off, and it is thinner
Each feet uses 2 M3x8 grub screws on each side (so 4 for a set of feet).
And some double sided tape.
Print 100% infill on Smooth PEI sheet for better adhesion.
IT IS IN TWO PARTS. SEPARATE THEM IN TWO DIFFERENT OBJECTS IN PRUSASLICER FOR PRINTING!
Update: It was quite fragile, and the holes did not print quite well due to the thickness, so I reinforced them a bit. They are 2mm thicker, but at least they feel more durable. Also I made it 2mm longer and moved it to the center a bit so that the torque does not make them to unstick easily. It is part V4.
Also Ideally print it on smooth bed. Double sided tape sticks a lot better on that surface.