Brother Printer Paper End Stop HL-3170CDW, MFC-9330CDW, MFC-9340CDW
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Brother Printer Paper End Stop HL-3170CDW, MFC-9330CDW, MFC-9340CDW
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 26
- Wydruki
- 0
- Wyświetlenia
- 282
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial
This was modified to fit the Brother MFC-9340CDW paper tray where the tabs may break off on the paper end stop.
The original design had a larger gap between paper and the stop and didn't fit close enough for my needs.
Added 2 different models the original, plus 3 mm thicker near the paper, then a second model 4mm, but had a notch for the existing plastic piece.
**It will depend on where your original tabs break off, as to how far this will fit.
Printed it PLA, supports will be required to touch the bed at minimum, but I did tree supports.
Other models that may work (if there is support for legal size paper):
HL-3170CDW, MFC-9330CDW, MFC-9340CDW
I think foam pads may help with fit, depending on the break location.