Double RepRack - DIY Filament Storage x2

DIY Doubled Up!

Remixed version of "RepRack" filament storage system that stacks 2 rows of Filament spools atop of each other. Designed to sit on a shelf or shelving unit. Uses 1/2" EMT conduit as the "Rack rails" of the system. Requires screws to install the clamps that retain the rack rails.

Requires additional hardware:

• Thread Cutting Screws

• M4 Hardware

• M3 Hardware

• M3 Heat Press Inserts

• 1/2" EMT Conduit

NOTE: Brackets are sizable and won't fit on an Ender 3 (or similar 235mm) bed. Measures 248mm x 208mm. Sized specifically to fit within a Prusa Mk3 / Mk4 build volume (also fits the Bambu X1 & P1P bed).

Parts Needed (Affiliate Links):

• 1/2" Conduit: https://www.lowes.com/pd/Common-1-2-in-Actual-50-In-Metallic-Emt-10-ft-Conduit/3129551

• M3 Heat Inserts: https://amzn.to/3LEMezN

• Polymaker Filament: https://mrly.link/polymaker

Files Included:

• Double RepRack STEP File

• Left Double Rack STL

• Right Double Rack STL

• Mid Double Rack STL

• M4 Clamp STL

• Thread Cutting Screw Clamp STL

• M3 Insert Clamp STL

• Double Rack Bracket DXF

Recommended Print Settings:

• 3 Perimeters

• 20% Infill

• No Supports Required

• PLA filament is generally fine for this application. If near hot components ASA or ABS would be preferred.

• Bigger nozzle sizes & layer heights recommended (.6/.8) but not required.

Want to Support what I do? Check out my social medias please!

Link Tree: http://www.MandicReally.com/links