ATX Workbench PSU
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
My take on reusing an old ATX PSU into a Workbench Power Supply.
- Ocena
- 5 / 5
- Polubienia
- 145
- Pobrania
- 506
- Wydruki
- 4
- Wyświetlenia
- 3444
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I like the look of Armourist's version of an ATX PSU. But I wanted to use heat set inserts instead of nuts. Also fuses and special components should be added. So I started with modifying his design but ended with designing my own version of it. After publishing my make on his page I got asked for my files. So here they are. Be aware: I hadn't time to clean up these files for publication. When I do have some sparetime, I will recreate this whole project with OnShape and add some improvements and a full description. So this is actually “work in progress” and at the current state I just provide these files as is.
Things to improve:
- replace the nuts in the frame rails of the PSU with heat set inserts. (These parts have been taken over from Armourist's model)
- Push the handle forward and attach a stop to keep the power supply straight when carried
- use car fuses instead of the cylindrical ones to save space
- add description and BOM