Flexible segmented vacuum hose for drill press with parametric FreeCAD design
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Vacuum hose for my Scheppach DP18 Vario and Makita VC1310L shopvac. It's parametric and can be adjusted with FreeCAD
- Ocena
- 5 / 5
- Polubienia
- 274
- Pobrania
- 1401
- Wydruki
- 11
- Wyświetlenia
- 5643
- Oceny
- 11
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
This is my take on a segmented vaccum hose. It is parametric and can be adjusted within quite a range with very basic FreeCAD knowledge.
The 3mf and gcode files here are for a segmented hose with approx. 40mm inner diameter. The inlet will fit inside a vacuum hose with approx 38mm diameter.
The FreeCAD (version 0.20.2) models are adjustable (within reason) by just typing in the parameters in the table named “D” for dimensions. Best check the middle part of the video.
Printing advice:
- use 0.6mm nozzle
- use PETG for flexibility
- print 2 links first to check if the default fit works out for you
Needed hardware:
1x M6 bolt and matching wingnut
Enjoy.
Check the video for more instructions on how to customize the hose for your needs: