1 / 2
Auxiliary Cooler (3x40mm) for Ender 5 / Sovol SV-05
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Auxiliary Cooler (3x40mm) for Ender 5 / Sovol SV-05
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 26
- Wydruki
- 0
- Wyświetlenia
- 309
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
So I finally got to a point where I'm hitting a really hard to crack cooling issue on my Sovol SV-05. Even with a 5015 and a directed duct, I cannot get sufficient air on PLA for 300mm/s printing.
Inspired by the auxiliary coolers of the Neptune 4, the P1x and the K1, this is what I came up with.
Its supposed to be used with heatset M3 inserts and 40x40 fans.
THIS IS CURRENTLY UNTESTED (prints fine, just need to come up with a wiring solution now).
