1 / 6
Santoku Knife Sheath (7in / 178mm blade or slightly larger) — zdjęcie 1
1 / 6

Santoku Knife Sheath (7in / 178mm blade or slightly larger)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A hexagonal knife sheath for your 7'' santoku style knife, or any similarly sized knife.

Ocena
0 / 5
Polubienia
16
Pobrania
83
Wydruki
0
Wyświetlenia
911
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Kitchen
Licencja
Creative Commons — Attribution — Noncommercial

Yeehaw, a knife sheath for your fancy knives. I went three years just wrapping my ole reliable santoku in a towel and some rubber bands. I think it's time for an upgrade.

This project requires:

[7x] m3x5x4 heatset inserts [voron spec]
[8x] m3x12 bhcs 

optional:

[1x] m3x12 screw of any head type to retain the blade.

I recommend also checking out https://www.printables.com/model/272115-knurled-m3-m8-thumbscrews  and printing a thumb nut in your choice of accent color! The screw length will need to be adjusted. I think an m3x20 should work just fine.

Recommendation:
- Insert heatsets inserts from the outside in. 

There is an extra heatset insert spot by where you insert your knife. It is to insert a screw to keep the knife from falling out during transportation. I left a slot on either side for you to choose which side you wanted it on, if any at all. [See photo / note: my heatsets are black]

Tagi