Burj Khalifa
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The Burj Khalifa on a scale of 1:1000
- Ocena
- 5 / 5
- Polubienia
- 100
- Pobrania
- 1049
- Wydruki
- 10
- Wyświetlenia
- 4218
- Oceny
- 8
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Architecture & Urbanism
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
As the largest building in the world, I also wanted to include it in my collection. There are already some models, but I thought I'd give it a try. In the end, it wasn't quite that easy.
In 1:1000, the tower is already quite considerable in size
Printer setting (Prusa Slicer):
Extrusion width (over all): 0.4
Perimeter generator: Classic
Support:
Only required below the main entrance roofs at Part 1.
Notes:
The connections might be a little too big, but that depends on the printer. Otherwise, either glue or put some tape around the individual connectors to give them a better fit.