Connect 4 Token
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I was asked to make some replacement Connect4 tokens for someone who had lost three of each colour. No problem I…
- Ocena
- 5 / 5
- Polubienia
- 26
- Pobrania
- 335
- Wydruki
- 4
- Wyświetlenia
- 1258
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution
I was asked to make some replacement Connect4 tokens for someone who had lost three of each colour. No problem I thought. Silly me - the real life tokens have 24 holes and 24 blips on them which enable one token to stack onto another. However, it was a good CAD exercise and although producing them requires a printer capable of some very fine detail, the ones shown here worked just like the originals.
Instructions
There are two STL files here. One is a plain disk with a bevel on the top and bottom. The dimensions are 32mm diameter and 7.6mm height. However, to produce a good facsimile with the holes and blips, you will need to print two half counters using the other file and then glue them together.
Category: Games