Precision Belt Tension Indicator
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Tool to consistently and reliably equalize belt tension on delta printer.
- Ocena
- 5 / 5
- Polubienia
- 9
- Pobrania
- 47
- Wydruki
- 1
- Wyświetlenia
- 1005
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
I didn't have luck getting belt tension set consistently with other methods or belt tension designs. I designed this model using a cheap test indicator to measure the flex on the belt.
The contact points are glued in place to make it easier to print. The two bases are pinned using a nail. A Ø10mm x 18mm spring from an assortment was used for clamping force. M3 screw used to secure the test indicator in the dovetail groove.
The grooved contact points fit a 6mm wide belt nicely. The smooth contacts are easier to get onto the belt but let the tool slide around too much.