1 / 6
X-Axis Turbine Clip - MK3S+ — zdjęcie 1
1 / 6

X-Axis Turbine Clip - MK3S+

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Clip to attached the small turbine to the x-axis gear.

Ocena
0 / 5
Polubienia
10
Pobrania
35
Wydruki
0
Wyświetlenia
218
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

Added a clip to attached the small turbine to the x axis..  Had a request because on some printers the motor shaft was not sticking out enough to be able to attach directly to the small turbine.   The clip presses onto the front of the x-axis belt gear with a friction fit.  Also presses into the small turbine fan.   Not much else to it.

Tagi