Wilden Pump Crash Frame Foot V1
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Made this for a pump crash frame at work to make my life easier :) Fits 25mm x 25mm (1"x1") square bar/tube.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 142
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
First 3d design I ever made.
Made this for a wilden pump skid I use at work all the time. The crash frame around the pump made it difficult to move around and also for cleaning the floors, dirt used to get trapped inside the frame.
Now with these fitted the it's much easier to reposition the pump and to wash the floors with a hose since the water can just flow straight under the bars and out.
Printed solid in ABS-like resin on my Mars 3 without supports oriented the way it would sit under the metal bars. See pics. Very snug fit! Could be scaled for larger width/height bars.