Inlet Screen Socket / Tool for Rheem Tankless Water Heaters
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A special socket for removing and reinstalling the cap for the cold water inlet screen on a Rheem tankless water heater.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 43
- Wydruki
- 0
- Wyświetlenia
- 430
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A special socket, with a ¼ inch drive, for removing and reinstalling the cap for the cold water inlet screen on a Rheem tankless water heater.
The cold water inlet screen on a tankless water heater should be removed and cleaned as part of the annual maintenance/descaling flush procedure. This tool makes removing and reinstalling the cap for the inlet screen a simple process and protects the cap from being marred or damaged by the use of pliers or other similar tools not specifically designed for this purpose.
Print recommendations:
- 0.4mm or 0.6mm nozzle.
- 0.15mm layer height.
- 4 perimeters.
- 25% infill.
- 1.0mm – 1.2mm top and bottom thickness.
- Print with the mouth of the socket facing up; no supports necessary.
Material choice is up to you. I originally planned to print the final version in PC-CF, but the PETG prototypes worked well enough that I decided PC-CF was unnecessary. PLA would probably work just fine as well, since you shouldn't have a need to apply a large amount of torque to the inlet screen cap.