1 / 1
Cable routing Z belt cover mod: cutout and M3x6 screw — zdjęcie 1

Cable routing Z belt cover mod: cutout and M3x6 screw

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Rail-extrusion gap large cutout, as per Voron 2.4 manual, m3x6 BHCS screw recess, now, more thread is exposed.

Ocena
0 / 5
Polubienia
1
Pobrania
19
Wydruki
0
Wyświetlenia
176
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

I made a large cutout to comply with the gap from the rail to the extrusion, suggested from the Voron 2.4 manual. I also made a recess to sit a m3x6 BHCS screw into it, so more thread is exposed under the cover.
 

I tried to make a pull request but the repository seems to be stale :/

Tagi