Modular SciFi Outpost - Towers
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I created terrain pieces to create a modular outpost for 28mm wargaming, compatible to my other SciFi / Gothic ruins:…
- Ocena
- 0 / 5
- Polubienia
- 50
- Pobrania
- 287
- Wydruki
- 0
- Wyświetlenia
- 1264
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I created terrain pieces to create a modular outpost for 28mm wargaming, compatible to my other SciFi / Gothic ruins:
https://www.thingiverse.com/thing:2977213
https://www.thingiverse.com/thing:2977220
https://www.thingiverse.com/thing:2977238
https://www.thingiverse.com/thing:2977241
Use the other designs to create a complete Outpost:
https://www.thingiverse.com/thing:4712586 - straight walls
https://www.thingiverse.com/thing:4712609 - corners
https://www.thingiverse.com/thing:4714517 - gate
https://www.thingiverse.com/thing:4718060 - towers
The files here form a tower, with two options, one being as a straight wall and the other one being as a corner piece.
Assembly:
Simply glue BasicOutpostWall, TowerFront and OutpostUpperWall together by using the StandardConnector. Do this twice for a corner piece and glue the InnerEdgeConnector to one side. Then place (if you want) the magnet connectors in the edges (using 5mm magnets). Glue the OutpostStuetze next to them and then place the OutpostFloor or OutpostFloorEdge on top, similar to the straight piece or the corner piece. Use the UpperSideHolders to stabilise the Tower Front. Now, add another InnerEdgeConnector on top of the floor and then glue the OutpostFloorFull or OutpostFloorFullHole on top. Connect OutpostUpperWall with TowerSide or TowerBack (only for the straight piece) and add the pieces to the tower. Use InnerEdgeConnector_48 to stabilise the TowerSide pieces, InnerEdgeConnector_24 to stabilise all OutpostUpperWall pieces and InnerEdgeConnector_12 to stabilise the small sides of TowerSide or TowerBack. Be sure to glue the TowerStuetze (resp. TowerStuetzeEdge) togehter with TowerStuetzeUnten and TowerBolt to the bottom of the tower floor before you add the 12mm edge connectors.