1 / 3
Bicycle Dummy Hub for 12mm thru axles
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Its a dummy hub for 12mm thru axles. Print without support
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 119
- Wydruki
- 0
- Wyświetlenia
- 1010
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (29)Powiązane
The model can be printed without support. Optionally with disc, so that the chain does not jump when backpedaling. For the disc M3x8mm screws are needed.