1 / 6
Anycubic Kobra Neo Filament Trash Tub — zdjęcie 1
1 / 6

Anycubic Kobra Neo Filament Trash Tub

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Well, is this a remix? I grabbed the idea to have a trash tub outside of the built plate underneath the place where…

Ocena
4 / 5
Polubienia
22
Pobrania
310
Wydruki
1
Wyświetlenia
1332
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution

Well, is this a remix?

I grabbed the idea to have a trash tub outside of the built plate underneath the place where the Anycubic Kobra Neo (my new printer) dumps its filament trash when loading a filament or purging the nozzle at the start of the print.

I printed Thing 5505717 but I had to find out that it goes to far under the built plate and collides with the electrical connector to the heated bed when the built plate moves forward.

So I decided to do my own design.

In comparison to 5505717 I made the side which extends under the built plate steeper so that the filament pieces easier fall all the way to the bottom of the trough, while at the same time the shallower open side makes emptying easier.

I added "clip-on" feet which snap into the V grooves of the 40x20 aluminum extrusion and I made the trough shorter since it does not need to extend all the way to the front - the nozzle will never move in this direction anyway.

The modelling is done - as usual for me - in OpenSCAD, using the Bezier library for OpenScad by gaellafond

Print Settings

Printer Brand:

Anycubic

Printer: 

Kobra Neo

Rafts:

No

Supports: 

No

Resolution:

0.2 mm layer height

Infill: 

15% gyroid

Filament: Sakata PLA Magic Coal 

 

How I Designed This 

OpenSCAD

I started by modelling a Bezier curve which was like the shape of thing:5505717 but I decided to flip the slope over.

I added springy feet which will snap into the grooves of a 20x20 or 40x20 aluminum extrusion, fine tuning the dimensions with some test prints.

 

Category: 3D Printer Accessories

Tagi