Bambu Panda tool box top (Filament Painting)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Filament painted print made using HueForge - Filament swaps ONLY, no mmu/ams required
- Ocena
- 0 / 5
- Polubienia
- 27
- Pobrania
- 37
- Wydruki
- 0
- Wyświetlenia
- 864
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- 2D Plates & Logos
- Licencja
- Creative Commons — Attribution — Noncommercial
6 Color HueForge model. Bambu Panda tool box top filament painting made using Sunlu and Esun filaments. designed to fit the top of various bambu lab tool boxes available here on printables
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA Sunlu PLA+ Black Transmission Distance: 0.6
PLA Esun PLA+ Pine Green Transmission Distance: 1.5
PLA Sunlu PLA+ Grass Green Transmission Distance: 2.5
PLA Sunlu PLA Bright Green Transmission Distance: 10
PLA Sunlu PLA+ Pure Yellow Transmission Distance: 5
PLA Sunlu PLA+ White Transmission Distance: 7
Swap Instructions:
Black until layer #5 at 0.48mm
Pine Green until layer #6 at 0.56mm
Grass Green until layer #7 at 0.64mm
Green until layer #8 at 0.72mm
Pure Yellow until layer #11 at 0.96mm
White for the rest.
This is a filament blending model, I would recommend trying to match the td as close as possible if not using the exact filaments to get the best results
Use the exact numbers in your slicer to match up properly.
the model can be scaled to fit the box but keep the ‘Z’ height the same