Cat door holder (Keep dogs out of room but allow cats)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a very simple model designed to keep my dog out of my laundry room, but allow my cat to enter
- Ocena
- 0 / 5
- Polubienia
- 48
- Pobrania
- 421
- Wydruki
- 0
- Wyświetlenia
- 2713
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Pets
- Licencja
- Creative Commons — Attribution — Noncommercial
This model is an adjustable door holder. It should permit enough clearance for a cat to enter a room, while keeping out a dog. It requires one screw, although it should be pretty easy to print a little nub to fit into the door latch. It's super easy to install/remove, does not damage the door, and is adjustable after you've printed (just move the screw to a different hole)!
I was able to print it using 12.38g of PLA on a Bambu X1.
Designed in CAD sketcher: https://github.com/hlorus/CAD_Sketcher