Tear Drop Bird House
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A tear-drop or gourd-shaped birdhouse with a roof and landing peg! Printed in 4 parts: the Body, the Peg, the Roof, and
- Ocena
- 0 / 5
- Polubienia
- 24
- Pobrania
- 123
- Wydruki
- 0
- Wyświetlenia
- 551
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial
A tear-drop or gourd-shaped birdhouse with a roof and landing peg! Printed in 4 parts: the Body, the Peg, the Roof, and the Tube.
Birdhouse measures 8 inches tall (203.2 mm) x 6.65 inches wide (168.91 mm) x 7.69 inches deep (195.33 mm) when fully assembled. Entrance is 2 inches in diameter (50.8 mm)
Printing Instructions:
Body: Any Layer Height, Any Infill, Any Material, No Brim, Supports on Build Plate
Roof: Any Layer Height, Any Infill, Any Material, No Brim, No Supports
Peg: Print Vertically, Any Layer Height, Any Infill, Any Material, With Brim, No Supports
Tube: Print Horizontally: Any Layer Height, Any Infill, Any Material, No Brim, Supports on Build Plate
Assembly Instructions:
Insert peg from inside through hole under entrance, skinny side first. Slide roof onto top of body with grooves facing up. Tube should go through holes at top. Fit will be tight, carefully squeeze in with pliers.
Hang using string through tube at top.