KBD75v2 USB-C cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I was a little annyoed with the huge hole around the KBD75v2 USB port.
- Ocena
- 5 / 5
- Polubienia
- 11
- Pobrania
- 116
- Wydruki
- 1
- Wyświetlenia
- 963
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Public Domain
I was a little annyoed with the huge hole around the KBD75v2 USB port. It's super fiddly to insert the cable when you can't see the port (and it maybe helps a little to lessen the strain on the USB-C port), so I designed this super simple cover. It is held in place by the USB port and the top and bottom case. So far it works good, if I notice that it will get loose over time, I will add some clips to stay in place. I made three version for the two design which go to the edge, check what kind of usb-plug you have and if it fits (or just print it and try ;-)) .
PS.: try to loosen up the PCB if the part doesn't fit, if the PCB is a bit angled it might not fit.
Print instructions
super easy, just use standard prusa profiles.