1 / 4
Ubiquiti Bullet Camera 30 Degree base
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Angled base for mounting Ubiquiti Bullet Cameras at 30 degrees. Should work with G3, G4 and G5 Bullet cameras
- Ocena
- 0 / 5
- Polubienia
- 26
- Pobrania
- 200
- Wydruki
- 0
- Wyświetlenia
- 1273
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (57)Powiązane
Angled base for mounting Ubiquiti Bullet Cameras at 30 degrees. Should work with G3, G4 and G5 Bullet cameras.
It allows it to be mounted without kinking the Ethernet cable to get some more angles.
Print at higher layer thickness .3 for speed in PETG or ASA. Can print in PLA if not exposed to UV.
No supports needed.