1 / 2
Screw-top Storage Box for Out of Marbles — zdjęcie 1
1 / 2

Screw-top Storage Box for Out of Marbles

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A simple screwable storage systems for Out of Marbles

Ocena
0 / 5
Polubienia
5
Pobrania
64
Wydruki
1
Wyświetlenia
352
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

A simple container to keep the marbles for Out of Marbles safely in place.

Two versions: 

  • For a two-color print (no MMU required), use the 3mf files and swap filament when prompted.
  • For a single-color print, use the STL files. I suggest 15 to 20% infill, 2 or 3 walls, and a layer height of 0.2 mm.

Due to the overhang of the threads, there may be some extraneous strands of filament, just cut them off with an Xacto knife.

If you like what I'm doing…

 … consider buying me a coffee or joining my Club.