1 / 1
LSI 9300-16i SAS HBA 80mm fan shroud
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is an 80mm fan shroud for the LSI 9300-16i SAS HBA.
- Ocena
- 5 / 5
- Polubienia
- 31
- Pobrania
- 255
- Wydruki
- 0
- Wyświetlenia
- 3031
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 0) (Komentarze: 1)Remiksy (0)Kolekcje (39)Powiązane
I created this model to help cool my LSI 9300-16i SAS HBA, which runs very hot when not in a server chassis with lots of static pressure. I printed this in PETG, but you can probably get away with PLA+ if you have enough airflow.
Printed at .2mm layer height, 20% infill, no supports.