1 / 3
Bambulab AMS bracket for 2020 v-slot extrusions mounted on sliders
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Bambulab AMS bracket for 2020 v-slot extrusions mounted on sliders
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 28
- Wydruki
- 0
- Wyświetlenia
- 621
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bambu Lab Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (19)Powiązane
Bambulab AMS bracket for 2020 v-slot extrusions.
The stand, for dual AMS, is made out of 4x 500mm and 10x 400mm v-slot extrusions with gantry plates, used as sliders. (hole spacing is 10mm)
I printed this in PLA.
You need to print this model on it's side with a brim.
You need to print this model twice, once mirrored in the y-axis.
This model requires support in the 5 bolt holes and 2 cutouts (I used Style= ‘snug’)
Included is the f3d file
2023-12-10 v2 added a cutout