X/Y Lowrider by TwoTimes
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
These designs will work for CupCake serial number 100 and up.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 329
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
These designs will work for CupCake serial number 100 and up.
Videos of the TwoTimes LowRider:
TwoTimes designed the X/Y LowRider, and then vanished from the internet. I have re-uploaded the files here, to make sure at least one copy remains.
You should combine this Thing with this excellent linear bearing platform:
http://www.thingiverse.com/thing:33485
Pictorial instructions:
http://www.flickr.com/photos/48982649@N07/sets/72157624995806009/
Print instructions
Category: 3D Printer Parts Summary
These designs will work for CupCake serial number 100 and up.
Videos of the TwoTimes LowRider:
TwoTimes designed the X/Y LowRider, and then vanished from the internet. I have re-uploaded the files here, to make sure at least one copy remains.
You should combine this Thing with this excellent linear bearing platform:
http://www.thingiverse.com/thing:33485
Pictorial instructions:
http://www.flickr.com/photos/48982649@N07/sets/72157624995806009/
Print Settings
Printer Brand:
LulzBot
Printer:
TAZ 6
</div>Rafts:Doesn't Matter
Supports:
Doesn't Matter
</div>Resolution:0.20
Infill:
33%
</div>Notes:
Print using one or two shells, 30-50% infill for best results. Use ABS or HIPS, as the build platform gets pretty hot. If you can print this in T-Glasse or PolyCarb, all the better.
Instructions
Instructions on how to build this thing are pictorial only:
http://www.flickr.com/photos/48982649@N07/sets/72157624995806009/