Aventon Abound Abus 4750XL Cafe Lock Bracket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a cafe lock bracket to mount an Abus 4750XL on an Aventon Abound bike.
- Ocena
- 5 / 5
- Polubienia
- 3
- Pobrania
- 235
- Wydruki
- 2
- Wyświetlenia
- 2458
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
If you enjoy this bracket, please consider making a donation to familybikeride.org. I made this bracket to help families get on an affordable bike that can conveniently haul their family.
Please donate what you feel is fair to our group: https://www.familybikeride.org/donate/
It should be printed in a UV tolerant filament like ASA. I'd recommend printing it at least 70% infill. 100% is fine too if you can print a solid ASA without adhesion issues. Model will need to be oriented flat. I print these with a .8mm nozzle.
Two zip ties should be used to secure the lock on the sides via the holes, around the suspension fork. This will hold it firm against the fork.
You will need longer M5 screws to attach the bracket with the fender stays.
A chain accessory lock should also be used when securing the bike in a more risky setting and it should loop around the frame. Please see picture for locking with with a chain.
Parts needed:
2 x Hex Drive Socket Cap Screw (M5 0.8 x 20mm) - longer screws for fender stays
2 x 20mm Hex Drive Button Socket Cap Screw (Lock to bracket)
2 x M5 Flange Washer Nylon Insert (Lock to bracket)
2 x Black zip ties that are long enough to get around the bracket and the suspension
Instructions:
Pop the shell off the cafe lock so it is just exposed metal. Secure the 3D printed bracket to the lock using the through hole into the middle hole of the lock. The lower hole of the lock is where the zip tie will pass.
Use blue loctite on all connections.