1 / 2
Echo Show 5 Gen 1 & 2 Honeycomb Storage Wall (HSW) Shelf
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Shelf for Echo Show 5 Gen 1 & 2 on the Honeycomb Storage Wall (HSW)
- Ocena
- 5 / 5
- Polubienia
- 16
- Pobrania
- 99
- Wydruki
- 1
- Wyświetlenia
- 1196
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 1) (Komentarze: 1)Remiksy (0)Kolekcje (39)Powiązane
A stand for the Echo show Gen 1 & 2 on the HSW! I made clearance in the back for the cord to bend but not be stressed.
The cutouts also allow you to pass the cord through without needing to remove the shelf.
There are also holes for magnets (12mm diameter x 3mm thick) to be glued in but I didn’t use them for mine.
I printed with 15% infill, 4 walls, 4 top, 4 bottom.