Raspberry Pi 7" TouchScreen & Rpi 4B Enclosure mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Hi Makers!
- Ocena
- 5 / 5
- Polubienia
- 121
- Pobrania
- 552
- Wydruki
- 8
- Wyświetlenia
- 5093
- Oceny
- 8
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a component part of a 3D Printer enclosure project
Hi Makers!
After months of discoveries in the happy world of 3D modelling and printing on Thingiverse, time has come for me to share my first thing.
It is a three parts enclosure for the combination of a Raspberri Pi 7" Touchscreen with a Raspberry Pi 4 B model.
The feet is designed to fit a 3030 extruded aluminum profile with two M5 low profile screws and drop-in T-nuts.
Back plane assembly requires four M3x40 or M3x35 screws depending the model, to assemble the backplane to the frontplane.
The use is to provide functional and good looking touch interface to Octoprint(Octodash will be used in my case) but any of the existing UI will fit it anyway.
Fusion 360 design available on request.
Prusa i3 MK3 model is from Swesen
Raspberri Pi 4B model from Red Logo
Print Settings
Printer: Prusa I3 MK3S
Rafts: No
Supports: No
Infill: 100
Filament: Prusament Orange + Prusament Galaxy Black PETG