1 / 3
Rook 2020 PSU Mount for Mornsun LM200 — zdjęcie 1
1 / 3

Rook 2020 PSU Mount for Mornsun LM200

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Mount the PSU to the base of the Rook 2020

Ocena
5 / 5
Polubienia
17
Pobrania
71
Wydruki
2
Wyświetlenia
688
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Mount a Mornsun LM200-20B24R2 PSU to the base of the Rook 2020. This is the power supply provided with the Fabreeko Rook kit. Designed to use the same M5x8 screws used for other parts of the printer along with hammer nuts/t-nuts.

M3x6 screws for the bottom of the power supply and M3x10 screws for the side.

I found that there is a second variant of this PSU model (slightly different model number) and I'm not sure if it has different mounting positions. Best to double check.

This would probably be more stable if it went all the way across, but it was important to have a design I could actually print. It will fit a Prusa Mini (180x180).

Tagi